19.04.2016

Scaldis reveals official calling name for their unique DP II heavy lift vessel

During the design phase of the new DP II heavy lift vessel, Scaldis used the provisional calling name RAMBIZ 4000 referring to the lifting capacity.

In the meantime an important milestone took place.  The vessel’s keel laying ceremony took place on Saturday 27 February 2016 at the Hong Qiang shipyard near Shanghai.  Following this event, it is now time to reveal the name of the vessel.

Scaldis and its shareholders are very proud to announce that the vessel will sail under the name GULLIVER

The vessel’s name refers to Gulliver from Gulliver’s Travels.  In the book, Gulliver is famous for his travels, especially his voyage to Lilliput where his physical size and strength are an advantage.  His extraordinary capabilities puts Gulliver in a unique position.

The new heavy lift vessel will reflect these qualities as it executes its worldwide projects.

The Contract for the construction and delivery of the ship was signed on 29th January 2015. The design was drawn up in-house in cooperation with Vuyk Engineering Rotterdam, part of Royal IHC on the basis of the extensive experience that Scaldis has accumulated hoisting heavy objects in challenging offshore conditions. Delivery is scheduled for spring 2017 in Europe. The vessel will be built under full responsibility and coordination of Royal IHC in Qidong and finished at Huisman in Xiamen, both of which are located in the People’s Republic of China.

The ship is ordered to further support and expand the services, including the installation of offshore infrastructures and decommissioning-deconstruction activities for the oil and gas industry as well as the installation of offshore wind farms. The ship can also be used for any type of marine related heavy lifting work in challenging situations, such as the construction of bridge components and clearing subsea obstacles.

The provision of a helipad in combination with accommodation for 78 people means Scaldis is capable of providing a varied range of additional services.

A few specific characteristics make this new crane ship unique in its field. It has two Huisman cranes each with a lifting capacity of 2,000 tons, based on a design by Vuyk. The ship also has extra carrying capacity of 3,000 tons. The cranes can be moved by 25 m on the ship. This allows the deck to be used to transport and then relocate cargo at a later stage.

The ship and the cranes are an integrated design which allows the maximum load to be hoisted in significant wave heights of up to 1.5 m. In these circumstances, the freeboard is not less than 3 m anywhere on the vessel. In standby or transport modes, significant wave height can be as much as 7.0 m.  It is also worth noting that the maximum load can be lifted in water depths of around 5.0 m.

The four azimuth thrusters and the DP II system allow installation work to be conducted in deeper water without the use of anchors. This guarantees flexibility and efficiency and also means that work can be carried out in zones where many pipelines and cables already lie on the bed, for example. The crane ship is also equipped with 4 main working anchors and winches and 4 secondary devices.

The powerful and rapid ballast system can follow the hoisting operation exactly, allowing jobs to be completed quickly and continuously.

The ship will be equipped with a so-called 'moonpool' for the purposes of operating a separate ROV (Remotely Operated Vehicle) for inspecting and supervising installation work on the seabed. Finally, the presence of heavy fenders allows containers to be loaded/unloaded at sea.

Supplementary information :

Main characteristics

Calling name                          GULLIVER

Type                                       Self-propelled crane ship 

Principal                                 SCALDIS Salvage & Marine Contractors N.V.

Shipyard                                 Royal IHC

Length                                    108.00 m

Beam                                      50.90 m

Depth                                      8.00  m

Draught                                   4.90 m

Speed                                      7 knots

Hoisting capacity                    4.000 Ton

Total installed capacity           10,450 kW

Accommodation                     78 people

Special feature                        DP II and skidding cranes



« Back